- Home
- » Tanks
- » Pillow Tank
Pillow Tank
Water tanks are designed with an FDA approved liner.
Fuel tanks are constructed of fabric compatible with the storage of fuel.
Storage Capacity - 3,000 to 210,000 Gallons.
Construction
Each tank is constructed of tough puncture resistant fabric with an elastomeric coating on both sides to offer maximum resistance to weathering and abrasion.
- Resistant to temperature from -40F to 160F (-40C to 71C)
- Lightweight and flexible making relocation easy.
Chafing patches are included as part of our standard design. These patches are located on both the interior and exterior surfaces directly opposite each fitting to provide a double wall thickness supporting every piece of hardware. Handles are bonded on to the tank for strength and ease of handling.
Packaging
One tank with accessories, berm liner and repair kit per wooden crate.
Hardware & Accessories
Tanks are supplied completely ready for use.
Each tank is supplied with aluminum fittings which are permanently bonded to the tank, as follows:
Packed with the tank are the following quick disconnect fittings and accessories:
Berm Liners & Ground Cloths
Berm liners and ground cloths for secondary containment are available for deployment with fuel tanks and water tanks, respectively. Sizes are as follows:
Testing
GTA has completed all required U.S. Government testing for both fuel & water tanks. Prior to shipment, each tank is pressure tested at 3/4 psi. for 30 min.
Certification
Meets all U.S. Military requirements and specifications.
